Preserved Topic: Brush Making (Page 1 of 1)

This rant has been a long time in coming. There are some questions that I'm tired of hearing, so I finally knocked this out in a modest attempt at... something.

Bits and pieces from here and there plus lots of fiddling.


Brush Making for PS

For simple brushes, it's amazing how far a few black splotches and the Smudge tool will take you.

But the real fun doesn't start until you start using photographs. Any ol' photograph will do. I've got several sets of brushes that I've made from photographs of my favorite pr0n queens (seriously).

The easiest method for using a photograph is to run Image > Adjust > Threshold. Maybe clean it up with some airbrushing, smooth out some of the rough edges, and you're good to go.

But Threshold is so harsh, isn't it? I usually opt for Image > Adjust > Levels (ctrl + l). It offers a more control. It's also a good idea to convert a colour photo to greyscale before using Levels. Since brushes are greyscale, converting to grey first will give a better visual indication of how your custom brush will look.

That brings me to converting a colour photo to greyscale. Things are going to get a bit tricky here, and I'm going to start talking about Adjustment Layers. Ready?

This is a cool little trick passed down to me by a photographer buddy of mine. This is a great way of converting a colour photograph to greyscale. Open your photo in PS. Add an HSV Adjustment Layer and bring Saturation all the way down. Tada! Instant greyscale, but some of the contrast between colours can be lost. To fix it, use a Curves Adjustment Layer *between* the photo and the HSV Adjustment Layer. Not only does the Curves give you control over the contrast, but you can tweak the contrast in the seperate RGB (or CMYK) channels. Did you catch that?

Okay, start with a photo of some clouds. Nice white clouds and a nice blue sky. When such a photo is converted to greyscale, chances are pretty good that there isn't enough contrast. You could adjust the contrast after the fact, but a great deal of control is lost in doing so. Enter Curves. With Curves, you can tweak the contrast seperately in the Green and Red channels, thus pumping up the contrast for the greyscale. Woo!

Works great as a stand-alone technique. Can really work wonders when converting flesh tones to greyscale. And, because of using Adjustment Layers, you can paint areas out if your adjustments are too harsh for some areas of the canvas.

What does this have to do with making custom brushes from a photo? Well, brushes are greyscale, and having this kind of control over converting colour to greyscale is a *major* bonus.

Ah, but chances are you don't want to turn a whole photo into a brush -- just select bits and pieces of it. Right? Thought so. Enter Colour Dodge. Bah! Rather than explain this in it's entirety, I'll just run you through setting this up.

Grab a photo. Add your Curves Adjustment Layer and HSV Adjustment Layer in the proper order (don't forget to bring Saturation down all the way in the HSV Layer). On top of all this, add a new layer, fill with white, and set the Blending Mode to Colour Dodge.

At this point, everything should look white. Wah? Well, the Colour Dodge Layer is for painting on with black. I use Airbrush set to about 25%. If you want a part to show, paint with black. If you want to hide something that you don't like, paint with white. It's easy and pretty neat to be able to paint a new custom brush in this manner. It's kind of like sculpting.

I usually add a Levels Adjustment Layer to top off all of this. Woah, even more control (normally I would use another Curves, but Levels is enough control for me at this point). Sometimes I'll run a slight Gauss on the photo if the edges are too harsh.

In the end, it looks a little something like this:

5) Adjustment Layer > Levels. Tweak to taste.
4) Layer filled with white and set to Colour Dodge -- this is the layer that is painted on (Airbrush ~25%).
3) Adjustment Layer > HSV with Saturation all the way down.
2) Adjustment Layer > Curves. Tweak to taste, in seperate channels if necessary.
1) Photo, sometimes with a light Gauss.

I have an Action that I recorded that sets all this up for me for when I'm in the mood to play around. Pretty damn spiffy, and a quick way to make custom brushes. With all of the tweakability, quite a few brushes can be made from the same photo. The really cool thing is that Edit > Define Brush works on Merged -- gotta love that.

I'm sure that I've forgotten to mention a few things, but I think I've said enough for now.

play.fiddle.learn

hey, warj, that's a great technique. Something new to play with...

Yeap, cool stuff WJ. Kinda remind me of that playwithme.psd you posted some months back. Actually it would be interesting to use your grungebrush method in conjunction with the playwithme.
The techguy... ya you rock mate!

pr0n? h3h ! 7h0ûgú7 ¥0ü w3r3 700 01d f0r 7h!Ñg$ 1!k3 7h47...w!f3, k!d$ 4nd $7uff ([k]badass hacker[/k]

cheers

Never too old for pr0n, Pun. Then again, NTFS security or PGP help with the prying eyes.

Hehe lol. You've got that right Silence.

NTFS and PGP? Heh I just disable cookies and put my trust in Zonealarm, Winrar and the famous PO avi renaming (avi => XxX)

cheers

Good call, Punisher. This is the same thing, but I don't think I rambled about it back then (or did I?).

*cough*channel mixer *cough*

Ehm. Well War you did blabber something about threshold...or maybe you didn't. I can't remember, but it was pretty obvious that you've used threshold and dodge.
I also second that the threshold is a too "strong" effect to be used on "raw image pixels" (an excellent selection modifier though).

cheers

So then, imitating what was described as best I can something like


this ---

could turn into

this ---

?

Witherin

Looks good to me, Witherin.

I was making bunches of brushes to show what can be with this for brush making, but I crashes and lost around 15 brushes. Grrr!

I wrote some more on this at other forums, and I'm finally getting around to posting it here. Another Action recorded and available. This newer Action is very similiar to the one I posted before, but this one fits more with what I've been rambling about.


Addendums:

Sometimes, when you get it all set up, there will be artifacts showing through the Colour Dodge layer. This is because pixels on the photo are pure black. The easiest way to get rid of these artifacts is to change the Colour Dodge layer to Screen. However, I like Colour Dodge over Screen because it's softer, so to speak.

The way I use to get rid of the artifacts is to run Levels (ctrl + l) on the photo real quick. Change the Output from 0 to 1 and the artifacts disappear. Problem solved with next to no damage done to the photo. Doing so isn't always necessary, but I'll toss into the Action anyways. If you don't want it in the Action, just turn it off. No big deal.

Another way of getting rid of artifacts is to use the Curves Adjustment Layer. Just bring the lower-left corner up to 1 (Output: 1). Again, no big deal. Since I don't always use the Curves Adjustment Layer, this little tweak won't be a part of the Action (but the Curves Ad-Layer will be created).

If you do Gauss the photo, you might have to fix artifacts again with Levels. Case-by-case and all that.

One of my favorite things is to use Gradients on the Colour Dodge layer. Set the colours to Default (d), set the Gradient tool mode to Multipy, and fiddle away. I like using the Reflected Gradient for quick and sleazy spiderweb-ish lines.

Sometimes I use this for quick messy things to be dropped into other works. That is, I don't make a brush, but an element for another work. Make a selection, Copy Merged (ctrl + shift + c), go to other doc, Paste (ctrl + v), set Blending mode to Multiply or something.

I do have an Action that I use for this. I'm going to record a new one that fits more with what I've been talking about. Just open a photo, run the Action, and fiddle to your heart's content. Several Adjustment Layers will be created, but not all of them will be turned on. Once you understand the ideas behind all of this, I recommend that you record your own Action so things will be set up the way you want them.

Lots of fun things can be done. I don't think I'll ever get tired of playing with this.

As always - play.fiddle.learn

Download the Action: Brushthang.zip

Very nice!!


::..ICQ - 1929739

Great timeing! I am Just starting to get my feet wet with textured brushes! thanks!

. . .

I finally got around to tossing some brushes together again. Real quick job. Mostly from outdoor pictures. You know, trees, grass, and dirt. Few other things tossed in. Fifteen brushes with no real solid motiff or rhyme or reason. Just quick random things. Worth a quick look, but probably not to keep.

Hey, Izzay, if you match this brush set (post a set you've made), I'll make a brush set from wood pictures and post 'em. I'm really liking brushes made from wood houses and shacks. "Old West Grunge" or something. Two of the brushes in this set are made from wood photos.

miscsamples.zip

What's the point of having brushes that look like objects? Once you brush with them, you can't make out the objects anymore...

Slime, I don't think those kinds of brushes are meant to be stroked with, rather stamped down once.